- Jun 10, 2020-
In order to prevent sagging or slipping, the optical cable must be firmly fixed on the upper, lower end and middle of the channel on each floor. Normally, nylon cable ties or steel clips can be used for effective fixing. Finally, oil-seed plugging materials are used to block and seal all the gaps between the slots and pipe holes in the building where the optical cables pass through, and fire-proof measures such as blocking fire-proof materials should be taken to achieve the effect of moisture and fire prevention.
When laying the optical cable, an appropriate length should be reserved in accordance with the design requirements. Generally, 5m -10m should be reserved at the equipment end, and if there are special requirements, the appropriate length should be extended.